THE MANUAL IS A GENERIC SAFETY AND OPERATIONAL GUIDE; DETAILED PARAMETERS AND STEPS FOR SPECIFIC MODELS ARE SET OUT IN THE ACCOMPANYING NOTES (PDF). THE LAYOUT CORRESPONDS TO THE GB/T 9704-2012 BUSINESS CLERICAL FORMAT AND CAN BE EXPORTED FOR PRINTING.
Product Operations Manual (General Safety and Operations Guide)
General Security
- THE EQUIPMENT MUST BE OPERATED BY TRAINED PERSONNEL, READ WITH INSTRUCTIONS BEFORE IT BECOMES AVAILABLE;
- THE USE OF THE ENVIRONMENT IS IN ACCORDANCE WITH THE INSTRUCTIONS (VOLTAGE, HUMIDITY, VENTILATION);
- PROTECTION AND VENTILATION FOR THOSE INVOLVED IN ROTATION, HIGH TEMPERATURE, VACUUM OR CHEMICAL SOLVENTS;
- UNUSUAL FLAVOURS, NOISES OR ALARMS IMMEDIATELY CUT OFF THE POWER AND CONTACTED IT FOR SALE.
II. Opening and installation
- CHECK LISTS OF MODELS AND ACCESSORIES;
- (A) BE PLACED ON A LEVELY, VENTILATED, AND FAR FROM WATER AND HEAT SOURCES;
- AS REQUIRED, THE POWER LINES ARE NOT PRIVATELY ALTERED.
DAY-TO-DAY OPERATIONS (COMMON PROCESSES)
- IDENTIFICATION OF THE ENVIRONMENT AND POWER SOURCES;
- (B) SAMPLES (CIRCLE FLATTENING, ROCK-BED FIXED PACKAGINGS, TUNDRA/ENRICHMENT FITTINGS APPROPRIATE);
- SET PARAMETERS (TURN SPEED/TEMPERATURE/TIME);
- ACTIVATE AND OBSERVE OPERATIONAL STATUS;
- CLOSURE OF ROUTINE STOPPAGE, SAMPLING, CLEANING.
MAINTENANCE AND MAINTENANCE
- REGULAR CLEANING TO AVOID CORROSIVE RESIDUES;
- VALIDATION OF KEY AMOUNTS SUCH AS TEMPERATURE CONTROL, VELOCITY CONVERSION BY DESCRIPTION BOOK;
- VULNERABLE ITEMS ARE REPLACED IN ACCORDANCE WITH THE MANUAL; POWER OUTAGES ARE PERMANENTLY DISCONTINUED.
V. NOTES
- THE CENTRIFUGE SAMPLE MUST BE FLAT AND OVERLOAD IS PROHIBITED;
- FROZEN DRY/ENRICHMENT INVOLVING VOLATILE SOLVENTS SHALL BE CHILLED AND VENTILATED;
- THE MEMBRANE PLATING EQUIPMENT IS OPERATED BY THE TRAINEES AND FOLLOWS THE VACUUM AND HIGH TEMPERATURE PROTOCOLS.
⚠️ RED WIRE: ELECTRICAL OVERHAUL, SELF-RETROFITTING AND OVERLOADING ARE STRICTLY PROHIBITED; PERSONAL OR EQUIPMENT DAMAGE RESULTING FROM IRREGULAR OPERATIONS IS THE RESPONSIBILITY OF THE USER.
NOTE: THIS GENERIC MANUAL DOES NOT REPLACE MODEL SPECIFICATIONS; MODEL EXCLUSIVE STEPS, PARAMETERS AND TABOOS ARE SUBJECT TO THE OFFICIAL SPECIFICATIONS PROVIDED WITH THE EQUIPMENT。
Taisei High Biotech (Chongshan) Ltd
The copyrights are owned by Tai Tai High Biotech (China Mountain) Ltd. They may not be reproduced, summarized or used for commercial purposes without authorization.
Taisei High Biotech (Chongshan) LtdPublication: 10 August 2026